6F3B0250
1. System Configuration
¨Behind the programmer port cover
Analog setting adjusters
(V0 and V1)
V | V | V |
0 | 0 | 1 |
V | Mode control switch |
|
1 | (HALT / RUN) | R |
H / R |
| / |
|
| H |
PRG | Programmer port |
|
|
| |
| connector |
|
PRG
Power supply terminals:
Connect the power cable and grounding wire. The terminal screw size is M3.5. See sections 4.4 and 4.5 for wiring.
Input terminals:
Connect input signal wires. The terminal screw size is M3.5. See section 2.4 for details.
Output terminals:
Connect output signal wires. The terminal screw size is M3.5. See section 2.4 for details.
Input status LEDs:
Indicate the ON status of each input signal. (color: red)
Output status LEDs:
Indicate the ON status of each output signal. (color: red)
Basic Hardware and Function 25
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
