Toshiba 6F3B0250, PROSEC T1 T1S Peripheral tools, Series Program Development System T-PDS

6F3B0250

1. System Configuration

1.9 Peripheral tools

The following peripheral tools are available for the T1/T1S.

T-Series Program Development System (T-PDS)

The T-Series Program Development System (T-PDS) is a software which runs on any IBM-PC compatible personal computers such as Toshiba’s Notebook computers. The same T-PDS software supports on-line/off-line programming, debugging and program documentation for all the T-Series programmable controllers T1/T1S, T2/T2E/T2N and T3/T3H.

·User-friendly program editor includes cut & paste, address search & replace, program block move/copy, etc.

·Group programming - part program development by multiple designers and merging them into a complete program - enhance the software productivity.

·Powerful monitoring, I/O force and data set functions fully support your program debugging.

·Documentation of programs with commentary makes your maintenance work easy.

·Remote monitoring/programming via modem (radio/phone) is possible.

The table below shows the T-PDS versions that support the T1/T1S.

Type	Part number	Versions available for
		T1	T1S
T-PDS for Windows	TMW33E1SS	Ver 1.0 or later *1)	Ver 1.2 or later
T-PDS for MS-DOS	TMM33I1SS	Ver 1.61 or later *1)	Ver 2.1 or later

*1) The T1S can be used with these versions. However, in this case, there are the following functional limitations.

·The program size setting is only available as 2 k. It is set to 4 k mode in the T1S.

·Some of the added instructions (MAVE, DFL, HTOA, ATOH) may not be edited/monitored. (depending on the version)

NOTE

The connection cable for the T1 Series is different from that for upper T-Series PLCs. These cables are supplied separately.

Connection cable for T1/T1S ... Type: CJ105, 5 m length

Connection cable for T2/T3 ¼. Type: CJ905, 5 m length

Basic Hardware and Function 37

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net