6F3B0250
Safety Precautions
Installation:
!CAUTION
1.Excess temperature, humidity, vibration, shocks, or dusty and corrosive gas environment can cause electrical shock, fire or malfunction. Install and use the T1/T1S and related equipment in the environment described in this manual.
2.Improper installation directions or insufficient installation can cause fire or the units to drop. Install the T1/T1S and related equipment in accordance with the instructions described in this manual.
3.Turn off power before installing or removing any units, modules, racks or terminal blocks. Failure to do so can cause electrical shock or damage to the T1/T1S and related equipment.
4.Entering wire scraps or other foreign debris into to the T1/T1S and related equipment can cause fire or malfunction. Pay attention to prevent entering them into the T1/T1S and related equipment during installation and wiring.
5.Turn off power immediately if the T1/T1S or related equipment is emitting smoke or odor. Operation under such situation can cause fire or electrical shock. Also unauthorized repairing will cause fire or serious accidents. Do not attempt to repair. Contact Toshiba for repairing.
Wiring:
!CAUTION
1.Turn off power before wiring to minimize the risk of electrical shock.
2.Exposed conductive parts of wire can cause electrical shock. Use
3.Operation without grounding may cause electrical shock or malfunction. Connect the ground terminal on the T1/T1S to the system ground.
4.Applying excess power voltage to the T1/T1S can cause explosion or fire. Apply power of the specified ratings described in the manual.
5.Improper wiring can cause fire, electrical shock or malfunction. Observe local regulations on wiring and grounding.
4 T1/T1S User’s Manual
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
