Installation and Wiring | Toshiba PROSEC T1 T1S, 6F3B0250 manual

6F3B0250

4.Installation and Wiring

Excess temperature, humidity, vibration, shocks, or dusty and corrosive gas ! CAUTION environment can cause electrical shock, fire or malfunction.

Install and use the T1/T1S and related equipment in the environment described in this section.

Do not install the T1/T1S in the following locations:

·Where the ambient temperature drops below 0 °C or exceeds 55 °C.

·Where the relative humidity drops below 20 % or exceeds 90 %.

·Where there is condensation due to sudden temperature changes.

·In locations subject to vibration that exceeds tolerance.

·In locations subject to shock that exceeds tolerance.

·Where there are corrosive or flammable gases.

·In locations subject to dust, machining debris or other particles.

·In locations exposed to direct sunlight.

Observe the following precautions when installing enclosures in which the T1/T1S will be installed:

·Provide the maximum possible distance from high-voltage or high-power panels. This distance must be at least 200 mm.

·If installing the enclosures in the vicinity of high-frequency equipment, be sure to correctly ground the enclosures.

·When sharing the channel base with other panels, check for leakage current from the other panels or equipment.

68 T1/T1S User’s Manual

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net