Toshiba 6F3B0250 Variable input filter constant, High speed counter, Interrupt input function

8. Special I/O Functions

The table below summarizes the mode setting data of each function. In the table, ‘-’ means do not care.

Variable input filter constant										SW16
			F E D C B A 9 8 7 6 5 4 3 2 1 0
Use			1	0	- -		-	-	0 0 -			- 0 0 - - - -
High speed counter										SW16
			F E D C B A 9 8 7 6 5 4 3 2 1 0
Single phase		Channel 1 only	-	0	0	1	0	0	0	0	0	0	0	0	0	0	1	1
up-counter		Channel 2 only	-	0	1	0	0	0	0	0	0	0	0	0	0	0	1	1
		Both channels	-	0	1	1	0	0	0	0	0	0	0	0	0	0	1	1
Single phase		Channel 1 only	-	0	0	1	0	1	0	0	0	0	0	0	0	0	1	1
speed-counter		Channel 2 only	-	0	1	0	0	1	0	0	0	0	0	0	0	0	1	1
		Both channels	-	0	1	1	0	1	0	0	0	0	0	0	0	0	1	1
Quadrature bi-pulse counter			- 0		0	0	1	0	0	0	0	0	0	0	0	0	1	1
Interrupt input function										SW16
			F E D C B A 9 8 7 6 5 4 3 2 1 0
Interrupt 1 only	Rising (OFF to ON)		-	0	0	1	0	0	0	0	0	0	0	0	0	1	0	1
	Falling (ON to OFF)		-	0	0	1	0	0	0	0	0	0	0	0	1	0	0	1
Interrupt 2 only	Rising (OFF to ON)		-	0	1	0	0	0	0	0	0	1	0	0	0	0	0	1
	Falling (ON to OFF)		-	0	1	0	0	0	0	0	1	0	0	0	0	0	0	1
Both interrupts	No.1 = Rising, No.2 = Rising		-	0	1	1	0	0	0	0	0	1	0	0	0	1	0	1
1 and 2	No.1 = Rising, No.2 = Falling		-	0	1	1	0	0	0	0	1	0	0	0	0	1	0	1
	No.1 = Falling, No.2 = Rising		-	0	1	1	0	0	0	0	0	1	0	0	1	0	0	1
	No.1 = Falling, No.2 = Falling		- 0		1	1	0	0	0	0	1	0	0	0	1	0	0	1
Pulse output function										SW26
			F E D C B A 9 8 7 6 5 4 3 2 1 0
CW/CCW method			-	-	-	0	0	0	0	0	0	0	0	0	0	0	1	1
Pulse/Direction (PLS/DIR) method			- -		- 0		0	0	0	0	0	0	0	0	0	1	1	1
PWM output function										SW26
			F E D C B A 9 8 7 6 5 4 3 2 1 0
Use			-	-	-	0	0	0	0	0	0	0	0	0	0	0	0	1

For example, the following programs can be used to select the quadrature bi-pulse counter.

or

(H0803)

Basic Hardware and Function 271

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net