Toshiba PROSEC T1 T1S, 6F3B0250 user manual Series Handy Programmer HP911A

6F3B0250

1. System Configuration

T-Series Handy Programmer (HP911A)

The HP911A is a hand-held programmer, that can be used to program the T1/T1S using ladder diagram. Its portability makes it ideal for maintenance use at remote locations.

The HP911A has the following features.

·The HP911A supports ladder diagram programming of T-Series programmable controllers T1/T1S, T2/T2E/T2N and T3.

·Built-in EEPROM allows program copy between T-Series controllers.

·Two display modes are available,

-Normal: 5 lines and 12 columns

-Zoom: Full device description

·On-line data set and I/O force are useful for system checking.

·Backlit LCD display allows operation in dim light.

There are two types of the Handy Programmer (HP911) depending on the cable included with.

Type	Part number	Cable included with	Versions available for T1/T1S
HP911A	THP911A*S	2 m cable for T1/T1S	Ver 1.1 or later
HP911	THP911**S	2 m cable for the upper	Ver 1.1 or later
		T-series PLCs

The T1S can be used with the HP911(A). However, there are the following functional limitations.

·The program size setting is only available as 2 k. It is set to 4 k mode in the T1S.

·Some of the added instructions (MAVE, DFL, HTOA, ATOH) cannot be edited/monitored.

NOTE

A 2 m connection cable for the T1/T1S (Type: CJ102) is supplied with the

HP911A. The cable for the T2/T3 is available separately. (Type: CJ902, 2 m length)

38 T1/T1S User’s Manual

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net