Aastra Telecom 57I CT, 55I Full-Duplex 10Mbps or 100Mbps, Configuring the LAN Port and PC Port

IP Phone Administrator Guide

Network Settings

Full-Duplex (10Mbps or 100Mbps)

Phones				Full-duplex data transmission means that data can be transmitted in both
				directions on a signal carrier at the same time. For example, on a LAN with a
				technology that has full-duplex transmission, one device can be sending data on
				the line while another device is receiving data. Full-duplex transmission implies a
				bidirectional line (one that can move data in both directions). On the IP phones,
IP				you can set the full-duplex transmission to transmit in 10Mbps or in 100Mbps.
				Configuring the LAN Port and PC Port
the				You can configure the Ethernet port transmission method to use on the IP phones
				using the configuration files, the IP Phone UI, or the Aastra Web UI.
Configuring
		Configuration Files
	For specific parameters you can set in the configuration files, see Appendix A, the section, “Network
	Settings” on page A-6.
		IP Phone UI
	Step		Action
	1		Press	on the phone to enter the Options List.
	2		Select Administrator Menu.
	3		Enter your Administrator password.
			Note: The IP Phones accept numeric passwords only.
	4		Select Network Settings.
	5		Select Ethernet.
	6		Select LAN Port Link.

4-12 41-001160-00, Release 2.1, Rev 04