Aastra Telecom 55I, 57I CT, 53I manual # Configuration Server Settings

Sample Configuration Files

Sample Configuration Files

#NAT device between the server and the phone, then you must set the

#following two parameters for the phone to function correctly.

#sip	nortel nat	support: 1	# 1 = enabled
#sip	nortel nat	timer: 60	# seconds between keep alive messages

#Option 2:

#If you are using a session border controller, you should set the

#outbound proxy to the session border controller address

#sip outbound proxy: sbc.aastra.com

#sip outbound proxy port: 0# a value of 0 enables SRV

# lookups for the address of

# the proxy.

#Option 3:

#If you know the public IP address of your NAT device and and have

#opened up a port for the SIP messages then you can statically

#assign this information.

#sip nat ip: 67.123.122.90

#sip nat port: 5890

#Additional Network Settings

#=============================

#sip rtp port: 3000 # Eg. RTP packets are sent to port 3000.

#-------------------------------------------------------------------

# Configuration Server Settings

41-001160-00, Release 2.1, Rev 04

Appendix D

D-5