Aastra Telecom 55I, 57I CT, 53I manual Park Calls/Pick Up Parked Calls, Sprecode Pickupsprecode

Configuring Operational Features

Operational Features

Park Calls/Pick Up Parked Calls

The IP phones (including the 57i CT handset) have a park and pickup call feature that allows you to park a call and pickup a call when required. There are two ways a user or administrator can configure this feature:

•Using a static configuration (globally configures park and pickup)

•Using a programmable configuration

Note: The IP phones accept both methods of configuration. However, to avoid redundancy, Aastra Telecom recommends you configure either a static configuration or a programmable configuration.

The IP phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers.

The following paragraph describes the park and pickup static configuration on the IP phones.

Reference

For information on configuring the park and pickup programmable configuration (using a key), see “Park/Pick Up Key” on page 5-153.

Park/Pickup Static Configuration (55i, 57i, 57i CT only)

Using the static method of configuring park and pickup configures these features on a global basis for all IP phones connected in the network. You can use the configuration files or the Aastra Web UI to configure a park/pickup static configuration.

In the configuration files, you use the following parameters to statically configure park/pickup:

•sprecode:

•pickupsprecode:

Operational IP Phone Features

41-001160-00, Release 2.1, Rev 04 5-35