Aastra Telecom 57I CT, 55I, 53I manual Configuring Call Waiting/Call Waiting Tone

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

Call Waiting Tone

You can also enable or disable the playing of a short “Call Waiting Tone" when there is an incoming call on your phone. This feature is enabled by default. If you have Call Waiting enabled, and a call comes into the line for which you are on an active call, a tone is audible to notify you of that incoming call. The tone is also audible to the caller to indicate to that caller you are currently on another call.

Note: The Call Waiting Tone feature works only if Call Waiting is enabled.

A User or Administrator can configure this feature. An Administrator can configure this feature using the configuration files or the Aastra Web UI.

Configuring Call Waiting/Call Waiting Tone

Use the following procedures to configure the Call Waiting/Call Waiting Tone features on the IP phone.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Call Waiting Settings” on page A-101.

5-44 41-001160-00, Release 2.1, Rev 04