Aastra Telecom 57I CT, 55I, 53I manual Basic Network Settings, Dhcp

IP Phone Administrator Guide Administrator Level Options

Administrator Options

Basic Network Settings

If Dynamic Host Configuration Protocol (DHCP) is enabled, the IP phone automatically configures all of the Network settings. If the phone cannot populate the Network settings, or if DHCP is disabled, you can set the Network options manually.

Parameter In	Parameter in	Parameters in	Description
IP Phone UI	Aastra Web UI	Configuration Files
DHCP	DHCP	dhcp	Enables or disables DHCP.
			Enabling DHCP populates the
			required network information. The
			DHCP server serves the network
			information that the IP phone
			requires. If the IP phone is unable to
			get any required information, then
			you must enter it manually. DHCP
			populates the following network
			information:
			IP Address, Subnet Mask, Gateway,
			Broadcast Address, Domain Name
			Servers (DNS), TFTP, HTTP
			HTTPS, and FTP servers, and
			Timer Servers.
			Note: For DHCP to automatically
			populate the IP address or qualified
			domain name for the TFTP server,
			your DHCP server must support
			Option 66.
			For more information, see “DHCP”
			on page 4-4.
IP Address	IP Address	ip	IP address of the IP phone. To
			assign a static IP address, disable
			DHCP.
			For more information, see
			“Configuring Network Settings
			Manually” on page 4-8.

3-32 41-001160-00, Release 2.1, Rev 04