Aastra Telecom 57I CT, 55I, 53I manual # Speed Dials

Appendix D

IP Phone Administrator Guide

Sample Configuration Files

#Softkeys can be set either server wide or unique to each phone.

#Setting softkeys as line/call appearances should be done in the

#"<mac>.cfg" file, since these are unique to each phone.

#Notes:

#

#There are a maximum of 18 softkeys that can be configured on the

#57i or 57iCT phone. These can be set up through either of the 2

#configuration files, depending on whether this is to be server wide

#("aastra.cfg") or phone specific ("<mac>.cfg"). Each softkey needs

#to be numbered from 1 - 18, for example "softkey12 type:

#speeddial". Softkeys can be set up as speeddials or as additional

#call/line appearances and have a type, label and value associated

#with it as seen here in the default softkey settings.

#SOFTKEY TYPES: "line", "speeddial", "blf", "list", "dnd"

#SOFTKEY LABEL: Alpha numeric name for the softkey. The maximum

#	number of characters for this value is 10 for
#	speeddials and dnd, 9 chars for lines, blf
# SOFTKEY VALUE: If softkey type is a speeddial, any DTMFs (from
#	0 - 9, *, "#") or a comma (,) for 500ms pause and
#	'E' for On-hook can be set for the value.
#	If softkey type is blf it is the extension you want
#	to monitor.

# SOFTKEY LINE: This is line associated with the softkey.		For line
#	softkeys the value must be between 5 and 9	(1 - 4
#	are already hardcoded as the L1, L2, L3 and L4 hard
#	key line/call appearances)

# Speed Dials

softkey1 type: speeddial

softkey1 label: "Ext Pickup"

softkey1 value: *8

D-22 41-001160-00, Release 2.1, Rev 04