Aastra Telecom 57I CT Message Waiting Indicator Line, Configuring Message Waiting Indicator MWI

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

Message Waiting Indicator Line

A User or Administrator can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For example, if you configure the MWI LED on line 3 only, the LED illuminates if a voice mail is pending on line 3. If you configure the MWI LED for all lines, the LED illuminates if a voice mail is pending on any line on the phone (lines 1 through 9).

A User can configure the MWI using the Aastra Web UI only. An Administrator can configure the MWI on single or all lines using the configuration files or the Aastra Web UI.

Configuring Message Waiting Indicator (MWI)

Use the following procedures to configure MWI on the IP phone.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Message Waiting Indicator Settings” on page A-102.

5-58 41-001160-00, Release 2.1, Rev 04