Aastra Telecom 53I, 57I CT, 55I manual For programmable keys

Configuring Operational Features

Operational Features

Aastra Web UI

5If applicable, in the "Value" field, enter a value to associate with the softkey. For example, for a speeddial value, you can enter a number you want to use for the speeddial key, or 12345+ as a speeddial prefix.

6If applicable, in the "Line" field, select the line for which you want to associate the softkey.

7Some softkey types allow you to configure specific operational states. Operational states display to the IP phone when a softkey is used.

To enable/disable an operational state, click the "Idle", "Connected", "Incoming", or "Outgoing" fields to check or uncheck the box.

	Note: Operational states are not applicable to expansion modules.
8	Click	to save your changes.

For programmable keys:

9In the “Hard Key” field, select the programmable key type you want to configure.

Reference: For available type values on each IP phone model, see Appendix A, the section, “Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters” on page A-136.

10In the "Value" field, enter a value to associate with the programmable key. For example, for a speeddial value, you can enter a number you want to use for the speeddial key, or 12345+ as a speeddial prefix.

11In the "Line" field, select the line for which you want to associate the programmable key.

12 Click to save your changes.

Operational IP Phone Features

41-001160-00, Release 2.1, Rev 04 5-105