Aastra Telecom 57I CT, 55I, 53I manual Message Waiting Indicator Settings, Range Example

IP Phone Administrator Guide

Operational, Basic, and Advanced Parameters

Appendix A

Parameter –	Aastra Web UI:		Basic Settings->Preferences->General
call waiting tone	Configuration Files		aastra.cfg, <mac>.cfg
Play Call Waiting Tone
(in Web UI)
Description	Enable or disables the playing of a call waiting tone when a caller is on an
	active call and a new call comes into the phone.
	Note: The Call Waiting Tone feature works only if the Call Waiting
	parameter is enabled.
Format	Boolean
Default Value	1	(enabled)
Range	0	(disable)
	1	(enabled)
Example	call waiting tone: 0

Message Waiting Indicator Settings

Parameter –	Aastra Web UI	Basic Settings->Preferences->General
mwi led line	Configuration Files	aastra.cfg, <mac>.cfg
Message Waiting Indicator
Line
(in Web UI)
Description	Allows you to enable the Message Waiting Indicator (MWI) on a single
	line or on all lines on the phone. For example, if you set this parameter to
	3, the LED illuminates if a voice mail is pending on line 3. If you set this
	parameter to 0, the LED illuminates if a voice mail is pending on any line
	on the phone (lines 1 through 9).
	Note: To enable MWI for all lines in the configuration files, set this
	parameter to zero (0). The enable MWI for all lines in the Aastra Web UI,
	select “All” in the “Message Waiting Indicator Line” field.
Format	Integer
Default Value	0 (all lines)
Range	0 to 9
Example	mwi led line: 3

A-102 41-001160-00, Release 2.1, Rev 04