Aastra Telecom 53I, 57I CT, 55I manual Click on Basic Settings-Preferences

Configuring Operational Features

Operational Features

Configuring the SIP Local Dial Plan, Dial Plan Terminator, and Digit Timeout

Use the following procedures to configure the SIP Local Dial Plan using the configuration files or the Aastra Web UI.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “SIP Local Dial Plan Settings” on page A-39.

Aastra Web UI

1Click on Basic Settings->Preferences.

2In the "Local Dial Plan" field, enter a valid local dial plan (up to 127 alphanumeric characters) for the IP phone. Default is X+#XX+*. Enter prepended digits as required.

3Enable the "Send Dial Plan Terminator" field by checking the check box. (Disable this field by unchecking the box). Default is disabled.

Operational IP Phone Features

41-001160-00, Release 2.1, Rev 04 5-33