Configuration Interface Methods

Configuration Methods

Configuration Files (Administrator Only)

A system administrator can enter specific parameters in the configuration files to configure the IP phones. All parameters in configuration files can only be set by an administrator.

You can enter specific configuration parameters in either of the following configuration files:

aastra.cfg

<mac>.cfg

References

For information about configuration file precedence, see Chapter 1, “Overview.”

For a description of each configuration file parameter, see Appendix A, “Configuration Parameters.”

Using the Configuration Files

When you use the configuration files to configure the IP phones, you must use a text-based editing application to open the configuration file (aastra.cfg or <mac>.cfg).

Use the following procedure to add, delete, or change parameters and their settings in the configuration files.

Note: Apply this procedure wherever this Administrator Guide refers to configuring parameters using the configuration files.

Configuration Interface Methods

41-001160-00, Release 2.1, Rev 04

2-15

Page 57
Image 57
Aastra Telecom 55I, 57I CT, 53I manual Configuration Files Administrator Only, References, Using the Configuration Files