Aastra Telecom 53I, 57I CT, 55I manual Select Restart

Configuring Network and Session Initiation Protocol (SIP) Features

Network Settings

IP Phone UI

Step Action

6Select Type of Service SIP. or

Select Type of Service RTP. or

Select Type of Service RTCP.

7Enter a value for “Type of Service SIP”. Default is 26. or

Enter a value for “Type of Service RTP”. Default is 46. or

Enter a value for “Type of Service RTCP”. Default is 46. Valid values are 0 to 63.

Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map the applicable priority to the Protocol setting as shown in the table “DSCP Range/VLAN Priority” on page 4-33For more information, see the section “Configuring VLAN (optional)” on page 4-37.

8Press Done (3 times) to save the changes.

Note: The session prompts you to restart the IP phone to apply the configuration settings

9Select Restart.

Configuring the IP Phones

41-001160-00, Release 2.1, Rev 04 4-35