Aastra Telecom 57I CT State-Based Softkeys 55i, 57i, 57i CT only, Softkey Type Default States

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

State-Based Softkeys (55i, 57i, 57i CT only)

Users and administrators can configure a specific state to display when a softkey is being used. Available states you can configure for each softkey include:

•idle - The phone is not being used.

•connected - The current line is in an active call (or the call is on hold)

•incoming - The phone is ringing.

•outgoing - The user is dialing a number, or the far-end is ringing.

•busy - The current line is busy because the line is in use or the line is set as “Do Not Disturb”.

The following table identifies the applicable default states for each type of softkey you can configure on the IP phone.

Softkey Type	Default States
None	All states disabled.
Line	idle, connected, incoming, outgoing, busy
Do Not Disturb	idle, connected, incoming, outgoing, busy
(DND)
Speeddial	idle, connected, incoming, outgoing, busy
Busy Lamp Field	idle, connected, incoming, outgoing, busy
(BLF)
BLF List	idle, connected, incoming, outgoing, busy
Auto Call	idle
Distribution (ACD)
Directed Call	idle, connected, incoming, outgoing, busy
Pickup (DCP)/
Group Call Pickup
(GCP)
XML	idle, connected, incoming, outgoing, busy
Flash	All states disabled.
Sprecode	connected
Park	connected
Pickup	idle, outgoing

5-94 41-001160-00, Release 2.1, Rev 04