Mapping Redial and Conf Keys as Speeddials

Configuring Operational Features

Operational Features

Use the following procedure to enable/disable the Redial, Xfer, and Conf keys.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Mapping Key Parameters” on page A-133.

Mapping Redial and Conf Keys as Speeddials

You can map the Redial and Conference keys on the IP phone to use as speeddial keys. When the Redial or Conference key is pressed, the number configured for the key automatically speed dials. If no number is configured, the Redial and Conference keys return to their original functionality.

You can configure this feature using the configuration files or the Aastra Web UI.

Note: If you configure the Redial and Conference keys for speeddialing on the 57i CT Base Station, the Redial and Conference keys on the 57i CT handset retain their original functionality. The Redial and Conference keys on the handset are not configured for speeddial.

Use the following procedures to set the Redial and Conf keys as speeddial keys.