Aastra Telecom 53I, 57I CT, 55I manual Overview

Configuring Network and Session Initiation Protocol (SIP) Features

Overview

Overview

An administrator can configure the IP Phone Network and SIP options from the phone UI, from the Aastra Web UI, or the configuration files. Administrator level options are password protected in both the IP phone UI and the Aastra Web UI.

Note: An administrator has the option of enabling and disabling the use of password protection in the IP phone UI. This is configurable using the configuration files only. For more information about this feature, see Appendix A, the section “Password Settings” on page A-9.

The procedures in this section include configuring from the IP phone UI and the Aastra Web UI. To configure the IP phones using the configuration files, see Appendix A, “Configuration Parameters.”

To configure the phone using the IP phone UI, you must enter an administrator password. To configure the phone using the Aastra Web UI, you must enter an administrator username and password.

Note: In the IP phone UI, the default password is "22222". In the Aastra Web UI, the default admin username is "Admin" and the default password is "22222".

References

For configuring the IP phone at the Asterisk IP PBX, see Appendix C, “Configuring the IP Phone at the Asterisk IP PBX.”

For sample configuration files, see Appendix D, “Sample Configuration Files.” These sample files include basic parameters required to register the IP phone at the PBX.

Configuring the IP Phones

41-001160-00, Release 2.1, Rev 04 4-3