Aastra Telecom 57I CT, 55I, 53I manual Key Mapping, Enabling/Disabling Redial, Xfer, and Conf Keys

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

Key Mapping

There are hard keys on your phone, such as Hold, Redial, Xfer, and Conf that are configured by default for specific call-handling features. (See the product-specific User Guide for more information about these key functions.

Notes:

1. On the 55i and 57i, the Xfer and Conf keys are hard-coded by default on keys 5 and 6 to the left of the LCD display

and cannot be reassigned. The Xfer and Conf labels display when you lift the handset. To disable these keys, see the next paragraph.

2.On the 53i, the Xfer and Conf keys are assigned by default to keys 5 and 6, respectively. These keys are programmable keys and can be reassigned if applicable. To disable these keys, see the

next paragraph.

Enabling/Disabling Redial, Xfer, and Conf Keys

You can enable or disable the Redial, Xfer, and Conf keys as required using the following parameters in the configuration files:

•redial disabled

•conference disabled

•call transfer disabled

Valid values for this parameter are 0 (enabled) and 1 (disabled).

If this parameter is set to 1, the key is not active and is ignored if pressed by the user. For "redial disabled" the value of 1 does not save the dialed number to the "Redial List".

If this parameter is set to 0, the key is active and can be pressed by the user.

This feature is configurable via the configuration files only.

5-66 41-001160-00, Release 2.1, Rev 04