Aastra Telecom 57I CT, 55I, 53I Enabling/Disabling the Aastra Web UI, To disable the Aastra Web UI

IP Phone Administrator Guide Configuration Methods

Configuration Interface Methods

Heading	Description
TLS Support	Allows you to specify the SIP Root and Intermediate
	Certificate files to use when the phone uses the TLS
	transport protocol to setup a call.
	(Applicable to Administrator Only)
Troubleshooting	Allows you to perform troubleshooting tasks whereby the
	results can be forwarded to Aastra Technical Support for
	analyzing and troubleshooting.
	(Applicable to Administrator Only)

Enabling/Disabling the Aastra Web UI

The Aastra Web UI is enabled by default on the IP phones. A System Administrator can disable the Aastra Web UI on a single phone or on all phones if required using the configuration files. Use the following procedure to enable and disable the Aastra Web UI.

To disable the Aastra Web UI:

Configuration Files

Step Action

1Using a text-based editing application, open the <mac>.cfg file if you want to disable the Web UI on a single phone. Open the aastra.cfg file to disable the Web UI on all phones

2Enter the following parameter: web interface enabled: 0

Note: A value of zero (0) disables the Web UI on the phone. A value of 1 enables the Web UI.

3Save the changes and close the <mac>.cfg or the aastra.cfg file.

4Restart the phone to apply the changes. The Aastra Web UI is disabled for a single IP phone or for all phones.

2-14 41-001160-00, Release 2.1, Rev 04