Aastra Telecom 55I, 57I CT, 53I manual Options, Advanced Network Settings

Administrator Options

Administrator Level Options

Advanced Network Settings

				Administrator
Parameter In	Parameter in	Parameters in
IP Phone UI	Aastra Web UI	Configuration Files	Description
UPnP	UPnP	upnp manager	Enables or disables Universal Plug
			and Play (UpnP) on the IP phone. If
			you set this parameter to “0”, you
			can manually configure NAT on the
			IP phone and the UPnP manager
			will not start.
			For more information, see Chapter
			4, “Universal Plug and Play (UPnP)
			(for remote phones)” on page 4-27.
				Options
N/A	N/A	upnp gateway	IP address or fully qualified Domain
			address so even if the phone
			Name of the Internet gateway or
			router. This parameter stores the IP
			address of the gateway or router in
			the event that only non-default
			UPnP gateways get discovered on
			the network. The UPnP port
			mappings are saved to this IP
			reboots, it will still have the correct
			port mappings.
			For more information, see Chapter
			4, “Universal Plug and Play (UPnP)
			(for remote phones)” on page 4-27.
NAT IP	NAT IP	sip nat ip	IP address the network device that
			enforces NAT.
			For more information, see Chapter
			4, “Configuring NAT Address and
			Port (optional)” on page 4-21.
NAT SIP Port	NAT SIP Port	sip nat port	Port number of the network device
			that enforces NAT.
			For more information, see Chapter
			4, “Configuring NAT Address and
			Port (optional)” on page 4-21.

41-001160-00, Release 2.1, Rev 04 3-35