Operational, Basic, and Advanced Parameters
A-40 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
Parameter –
sip dial plan terminator
Send Dial Plan Terminator
(in Web UI)
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <mac>.cfg
Description Allows you to enable or disable a dial plan terminator. If you enable the
use of this parameter, when you configure the IP phone’s dial plan with a
dial plan terminator or timeout (such as the pound symbol (#)), the phone
waits 4 or 5 seconds after you pick up the handset or after to finish
dialing the number on the keypad before making the call.
Format Boolean
Default Value 0
Range 0 (Disable)
1 (Enable)
Example sip dial plan terminator: 1
Parameter –
sip digit timeout
Digit Timeout
(in Web UI)
Aastra Web UI Basic Settings->Preferences
Configuration Files aastra.cfg, <mac>.cfg
Description Represents the time, in seconds, between consecutive key presses on
the IP phone. The default for this parameter is 4 seconds. If you press a
key on the phone and wait 4 seconds before pressing the next key, the
key times out and cancels the digit selection. You must press consecutive
keys before the timeout occurs.
Format Integer
Default Value 4
Range Not Applicable
Example sip digit timeout: 6