Aastra Telecom 57I CT, 55I, 53I manual Using the FastReboot Command, LED Behavior XML Attribute

IP Phone Administrator Guide How to Create an XML Application

Appendix G

Using the FastReboot Command

Using an XML post, the FastReboot feature forces a phone to reboot in the idle state. It does not check for new firmware and only downloads language packs if there is a change in the supported filenames of the language packs. The phone DOES do a DHCP lookup on every “fast reboot”. It also only downloads the Directory files if the names have changed.

Note: For FastReboot commands, you must set the XML push server list in the Aastra Web UI from where the XML HTTP post is being sent.

The following example shows an AastraIPPhoneExecute object using the FastReboot command.

<AastraIPPhoneExecute>

<ExecuteItem URI=“Command:FastReboot”/> </AastraIPPhoneExecute>

XML Softkey or Programmable Key LED Behavior Command

You can control the behavior of XML softkey or programmable key LEDs using the command URI=”Led: <softkey or programmable key type>=<execute command>”/ with the AastraIPPhoneExecute object.

This LED feature is applicable to XML softkeys (top or bottom), programmable keys, and expansion module softkeys. The softkey or programmable key must be configured for XML before you enable this feature.

The following table describes the behaviors you can assign to the XML key LEDs, and the attribute you enter in the AastraIPPhoneExecute script.

LED Behavior	XML Attribute
on	URI = “Led: <softkey type>= on”/
off	URI = “Led: <softkey type>=off”/
fastFlash	URI = “Led: <softkey type>=fastflash”/
slowFlash	URI = “Led: <softkey type>=slowflash”/

G-42 41-001160-00, Release 2.1, Rev 04