Aastra Telecom 53I, 55I, 57I, 57I CT Configuring VLAN (optional) Use the following procedures to configure VLAN on the IP phone.

Network Settings
41-001160-00, Release 2.1, Rev 04 4-37
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
Configuring VLAN (optional)
Use the following procedures to configure VLAN on the IP phone.
Note: VLAN is disabled by default. When you enable VLAN, the IP
phones use the default settings for each VLAN parameter. You can
change the default settings if required using the following procedure.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Virtual Local
Area Network (VLAN) Settings” on page A-26.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4Select Network Settings.
5Select VLAN Settings.
To globally enable/disable VLAN and set priority for non-IP packets:
6Select VLAN Enable.
7 Press Change to set VLAN Enable to “Yes” to enable or “No” to disable. Default is “No”.
8 Press Done to save the changes.
9Select Phone VLAN.
10 Select VLAN Priority.
11 Se lec t Oth er and enter a non-IP priority value from 0 to 7 for non-IP packets.
Default for this field is 5.
12 Press Done (3 times) to return to the VLAN Settings menu.