Aastra Telecom 55I, 57I CT, 53I manual 41-001160-00, Release 2.1, Rev 131

Configuring Operational Features

Operational Features

Aastra IP Phone UI

Step Action

3Press the Log In softkey.

You are logged into the phone queue. Once you log in, examine the IP Phone UI, and note the following information:

•If your IP phone status is set to “available” then the server will begin to distribute phone calls from this queue to your IP phone.

•If your IP phone status remains “unavailable” after you log in, then you must manually change the state to “available” in order to start receiving calls.

•To temporarily stop receiving calls, you can switch the IP phone status to “unavailable.”

While you are on a call (or miss a call that has been distributed to your IP phone), your IP phone status automatically switches to “unavailable.” Your IP phone remains in the unavailable state until one of the following things occur:

•You use the IP Phone UI to manually switch the IP phone state back to available, or

•The availability “timer” for your IP phone expires. This only occurs if your administrator has configured an auto-availability timer on your IP phone.

4To Log out of the queue, press the Log Out softkey. The server no longer distributes phone calls to your IP phone.

Operational IP Phone Features

41-001160-00, Release 2.1, Rev 04 5-131