Aastra Telecom 55I, 57I CT, 53I manual Off

Administrator Options

Administrator Level Options

Parameter In	Parameter in	Parameters in		Administrator
IP Phone UI	Aastra Web UI	Configuration Files	Description
N/A	Outbound Proxy	sip outbound proxy	Address of the outbound proxy
	Server	server	server. All SIP messages originating
		(global)	from the phone are sent to this
		sip lineN outbound proxy	server. For example, if you have a
			Session Border Controller in your
		server	network, then you would normally
		(per-line)	set its address here. Default is
			0.0.0.0.
			For more information, see Chapter
			4, “Basic Network Settings” on
			page 4-4.
N/A	Outbound Proxy Port	sip outbound proxy port	The proxy port on the proxy server	Options
		(global)	to which the IP phone sends all SIP
		sip lineN outbound proxy	messages. Default is 0.
		port	For more information, see Chapter
		(per-line)	4, “Basic Network Settings” on
			page 4-4.
Registrar Server	Registrar Server	sip registrar ip	IP address of the SIP registrar. Up
		(global)	to 64 alphanumeric characters.
			Enables or disables the phone to be
		sip lineN registrar ip	registered with the Registrar. When
		(per-line)	Register is disabled globally, the
			phone is still active and you can dial
			using username and IP address of
			the phone. A message "No Service"
			displays on the idle screen and the
			LED is steady ON. If Register is
			disabled for a single line, no
			messages display and LEDs are
			OFF.
			For more information, see Chapter
			4, “Basic Network Settings” on
			page 4-4.
Registrar Port	Registrar Port	sip registrar port	SIP registrar’s port number. Default
		(global)	is 0.
		sip lineN registrar port	For more information, see Chapter
		(per-line)	4, “Basic Network Settings” on
			page 4-4.

41-001160-00, Release 2.1, Rev 04 3-47