Aastra Telecom 57I CT, 55I, 53I manual On 57i/57i CT

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

On 57i/57i CT

On the IP phone UI, the Park/Pickup feature displays the following:

•When a call comes in, and you pickup the handset, the custom label that you configured for the Park softkey displays on the Phone UI.

•After the call is parked, the label that you configured for the Pickup softkey displays on other phones in the network. You can then press the "Pickup" softkey, followed by the applicable value to pickup the call on another phone in your network.

•On the 57i CT, the customized labels apply to the base unit only. On the 57i CT handset, pressing Ï displays the default labels of "Park" and "Pickup".

Notes:

1. On the 57i CT, the customized labels apply to the base unit only. On the 57i CT handset, pressing Ïdisplays the default labels of "Park" and "Pickup".

2.On the 57i/57i CT, the old softkey labeled "Pickup" has been renamed to "Answer". This softkey uses the old functionality - when you pickup the handset, you see a softkey labeled "Answer". You can then press this key to pick up an incoming call. Do no confuse this feature with the new Park/Pickup configuration feature.

On 53i

•When a call comes in, and you pickup the handset, you can press the applicable "Park" programmable key to park the call.

•After the call is parked, you can press the "Pickup" programmable key, followed by the applicable value to pickup the call.

You can configure a Park and Pickup key configuration using the configuration files or the Aastra Web UI.

5-154 41-001160-00, Release 2.1, Rev 04