Aastra Telecom 53I, 57I CT, 55I manual SoftkeyN value

Configuration Parameters

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters

Parameter –	Aastra Web UI				Operation->Softkeys and XML
softkeyN value	Configuration Files				aastra.cfg, <mac>.cfg
Value
(In WEb UI)
Description	This is the value you assign to the softkey.
	The “softkeyN value” parameter can be set for the following softkey types
	only:
	•	speeddial		(you can enter a speeddial number for this field;
				optionally, you can also enter a prefix for the
				speeddial value to allow the phone to dial the prefix
				after you press the speeddial softkey; you then
				enter the rest of the number from the keypad on the
	•	BLF		phone.)
	•	sprecode
	•	Park
	•	Pickup
	•	dcp
	•	XML
	Notes:
	1.	For speeddial - Value is the phone number, extension, or prefix
		number to enter for the softkey.
	2.	For blf - Value is the extension you want to monitor.
	3.	For sprecode - Value is dependent on services offered by server.
	4.	For Park, Pickup - For valid values, see Chapter 5, the section,
		“Park/Pickup Call Server Configuration Values” on page 5-157. For
		Park/Pickup examples, see Chapter 5, the section, “Model 57i/57i CT
		Examples” on page 5-155.
	5.	For xml - You can specify a URI to use for this XML softkey. The
		variables you can use with the XML softkey URI are:
		•	$$SIPUSERNAME$$
		•	$$SIPAUTHNAME$$
		•	$$PROXYURL$$
		•	$$REMOTENUMBER$$
		•	$$DISPLAYNAME$$
		•	$$INCOMINGNAME$$
Format	Integer
Default Value	Not Applicable
Range	N/A
Example	softkey1 value: 9
	softkey2 value: 411
	softkey4 value: http://10.50.10.140 script.pl?name=$$SIPUSERNAME$$
	softkey5 value: 123456+ (example of a speeddial prefix)

Appendix A

41-001160-00, Release 2.1, Rev 04 A-141