Aastra Telecom 55I, 57I CT, 53I manual Configuring Park/Pickup Key Using Configuration Files

Configuring Operational Features

Operational Features

Configuring Park/Pickup Key Using Configuration Files

In the configuration files, you configure Park/Pickup using the key parameters. You must specify the "softkeyN value", "prgkeyN value", “topsoftkeyN value“, or “expmodX keyN value”. The following examples show Park/Pickup configurations using specific servers.

Model 57i/57i CT Examples

Server	Park Configuration	Pickup Configuration
Asterisk	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: asterisk;70	softkeyN value: asterisk;70
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle, outgoing**
Sylantro	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: sylantro;*98	softkeyN value: sylantro;*99
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle, outgoing**
BroadWorks	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: broadworks;*68	softkeyN value: broadworks;*88
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle, outgoing**
ININ PBX	softkeyN type: park	softkeyN type: pickup
	softkeyN label: parkCall	softkeyN label: pickupCall
	softkeyN value: inin;callpark	softkeyN value: inin;pickup
	softkeyN line: 1	softkeyN line: 1
	softkeyN states: connected*	softkeyN states: idle, outgoing**

*When you configure a softkey as "Park", you must configure the state of the softkey as "connected".

**When you configure a softkey as "Pickup", you can configure the state of the softkey as "idle, outgoing", or just "idle", or just "outgoing".

Operational IP Phone Features

41-001160-00, Release 2.1, Rev 04 5-155