Aastra Telecom 53I, 57I CT, 55I manual Softkey Settings for 55i, 57i, 57i CT

Configuration Parameters

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters

Softkey Settings for 55i, 57i, 57i CT

The value of "N" for the following parameters is dependent on the number of softkeys available on the55i, 57i, and 57i CT models. See the table above for applicable values.

Parameter –	Aastra Web UI	Operation->Softkeys and XML
softkeyN type	Configuration Files	aastra.cfg, <mac>.cfg
Type
(in Web UI)
Description	The type of softkey to configure. Valid types are:
	• none - Indicates softkey and/or programmable key is disabled.
	• line - Indicates softkey and/or programmable key is configured for
	line use.
	• speeddial - Indicates softkey and/or programmable key is configured
	for speeddial use. Speeddial is applicable to the 536M and 560M
	also. You can configure a softkey to speeddial a specific number by
	pressing that softkey. Optionally, you can also configure a speeddial
	key to dial prefix numbers. With this option, the prefix numbers
	automatically dial when you press the softkey, and the phone waits
	for you to enter the remaining numbers to dial out.
	Note: When there is an active call, the speeddial keys send DTMF
	digits through the active voice path. To dial out, you have to first put
	the active call on hold and then press the speeddial key.
	• dnd - Indicates softkey and/or programmable key is configured for do
	not disturb on the phone. This option is "Do Not Disturb" in the
	Aastra Web UI).
	• blf - Indicates softkey and/or programmable key is configured for
	Busy Lamp Field (BLF) use. User can dial out on a BLF configured
	key. Maximum of 50 BLFs are applicable to the 536M and 560M also.
	• list - Indicates softkey and/or programmable key is configured for
	BLF list use. (This option is BLF/List in the Aastra Web UI). User can
	dial out on a BLF List configured key.
	• acd - (for Sylantro Servers only) Indicates the programmable key is
	configured for auto call distribution (called “Auto call distribution” in
	the Aastra Web UI). The ACD feature allows the Sylantro server to
	distribute calls from a queue to registered IP phone users (agents).
	• dcp - (for Sylantro Servers only) Indicates the programmable key is
	configured for either directed call pickup or group call pickup (called
	“Directed Call Pickup” in the Aastra Web UI). The Directed Call
	Pickup/Group Call Pickup feature allows you to intercept or pickup a
	call on a monitored extension or a group of monitored extensions.
	• xml - Indicates the softkey and/or programmable key is configured to
	accept an XML application for accessing customized XML services.
	You can also specify an XML softkey URL for this option.
	•

Appendix A

41-001160-00, Release 2.1, Rev 04 A-137