Aastra Telecom 53I, 57I CT Configuring Ring Tones and Tone Sets, For global configuration only

Configuring Operational Features

Operational Features

Configuring Ring Tones and Tone Sets

			Use the following procedures to configure ring tones and tone sets on the IP	OperationalIP
			phones.
	Configuration Files
For specific parameters you can set in the configuration files for ring tones, see Appendix A, the section,
“Ring Tone and Tone Set Global Settings” on page A-94 or “Ring Tone Per-Line Settings” on page A-97.
				Phone
		IP Phone UI
Step		Action
For global configuration only:
1		Press	on the phone to enter the Options List.
2		Select Preferences.
				Features
3		Select Tones.
4		Select Set Ring Tone.
5		Select the type of ring tone (Tone 1 through Tone 5, or Silent).
6		Press Done to save the change.
7		Select Tone Set.
8		Select the country for which you want to apply the tone set.
		Valid values are Australia, Europe, France, Germany, Italy, Mexico, UK, and US. Default is US.
9		Press Done to save the change.
		The ring tone and tone set you select is immediately applied to the IP phone.

41-001160-00, Release 2.1, Rev 04 5-73