Aastra Telecom 57I CT, 55I, 53I manual PC Port Settings Port, Example

IP Phone Administrator Guide

Administrator Level Options

Options	Parameter In	Parameter in	Parameters in
	IP Phone UI	Aastra Web UI	Configuration Files	Description
	PC Port Settings (Port 1)
	PC Port VLAN ID	VLAN ID	VLAN id port 1	Specifies the VLAN ID used to pass
				packets through to a PC via Port 1.
				Note: If you set the PC Port VLAN
				ID (Port 1) to 4095, all untagged
Administrator				packets are sent to this port. The
				following is an example of
				configuring the phone on a VLAN
				where all untagged packets are sent
				to the passthrough port.
				Example
				You enable tagging on the LAN Port
				(VLAN id) as normal but set the PC
				Port (VLAN id port 1) to 4095. The
				following example sets the phone to
				be on VLAN 3 on the LAN Port but
				the PC Port is configured as
				untagged.
				tagging enabled: 1
				VLAN id: 3
				VLAN id port 1: 4095
				For more information, see Chapter
				4, “Virtual LAN (optional)” on
				page 4-31.
	PC Port Priority	Priority	QoS eth port 1 priority	Specifies the priority value used for
				passing VLAN packets through to a
				PC via Port 1.
				For more information, see Chapter
				4, “Virtual LAN (optional)” on
				page 4-31.

3-42 41-001160-00, Release 2.1, Rev 04