Aastra Telecom 57I CT, 55I, 53I manual Specifying the Language to Use

IP Phone Administrator Guide Operational Features

Operational IP Phone Features

Specifying the Language to Use

Once the language pack(s) have loaded, you must then specify which language to use on the phone. After the phone has booted up, you can specify which language(s) to use. You can use the configuration files and the IP Phone UI to specify the language for the IP Phone UI. You can use the Aastra Web UI to specify the files for the Aastra Web UI.

Use the following procedures to specify the language to use on the IP phone.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Language Settings” on page A-109and “Language Pack Settings” on page A-110.

Notes:

1. If you specify the language to use on the phone via the configuration files, you must reboot the phone for the changes to take affect.

2. All languages may not be available for selection. The available languages are dependant on the language packs currently loaded to the IP phone.

5-24 41-001160-00, Release 2.1, Rev 04