Aastra Telecom 53I Configuring the Configuration Server Protocol, Select Configuration Server

Configuring Network and Session Initiation Protocol (SIP) Features

Configuration Server Protocol

Configuration Server Protocol

You can download new versions of firmware and configuration files from the configuration server to the IP phone using any of the following types of protocols: TFTP, FTP, HTTP, and HTTPS. The TFTP setting is the default download protocol. You can configure the type of protocol that the IP phone uses by setting it in the configuration files, the IP phone UI, or the Aastra Web UI.

Note: For DHCP to automatically populate the IP address or domain name for the TFTP, FTP, HTTP, or HTTPS server, your DHCP server must support download protocol according to RFC2131 and RFC1541 for Option 66. For more information, see this chapter, the section, “DHCP” on page 4-4.

Configuring the Configuration Server Protocol

Use the following procedure to configure the configuration server protocol.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Configuration Server Settings” on page A-13.

IP Phone UI

Step	Action
1	Press	on the phone to enter the Options List.
2	Select Administrator Menu.
3	Enter your Administrator password.
	Note: The IP Phones accept numeric passwords only.
4	Select Configuration Server.
5	Select Download Protocol.

Configuring the IP Phones

41-001160-00, Release 2.1, Rev 04 4-79