Aastra Telecom 55I, 57I CT, 53I manual Per-Line Settings, Default Value Range Examples

Configuration Parameters

Operational, Basic, and Advanced Parameters

Per-Line Settings

Parameter –	Aastra Web UI	Advanced Settings>LineN>Autodial Settings
sip lineN autodial number	Configuration Files aastra.cfg, <mac>.cfg
Autodial Number
(in Web UI)
Description	On a per-line basis, this parameter specifies the SIP phone number that
	the IP phone autodials when the handset is lifted from the phone cradle.
	Valid values can be:
	-1	(Default) The phone uses the global
		autodial setting for this line.
	Blank	(Empty field) Disables autodial on this line.
	Valid SIP Number	Dials the SIP number specified for this line.
Format	Integer
Default Value	-1
Range	Any valid SIP number.
Examples	sip line1 autodial number: 8500

Appendix A

Parameter –	Aastra Web UI	Advanced Settings>LineN>Autodial Settings
sip lineN autodial timeout	Configuration Files	aastra.cfg, <mac>.cfg
AutoDial Timeout
(in Web UI)
Description	On a per-line basis, this parameter specifies the time, in seconds, that
	the phone waits to dial a preconfigured number after the handset is
	lifted from the IP phone cradle.
	If this parameter is set to 0 (hotline), the phone immediately dials a
	preconfigured number when you lift the handset. If this parameter is set
	to a value greater than 0, the phone waits the specified number of
	seconds before dialing the preconfigured number (warmline) when you
	lift the handset.
	Default is 0 (hotline).
Format	Integer
Default Value	0
Range	0 to 120
Examples	sip line1 autodial timeout: 30

41-001160-00, Release 2.1, Rev 04 A-83