Firmware and Configuration Files

41-001160-00, Release 2.1, Rev 04 1-23
Overview
Overview
Installing the Firmware/Configuration Files

The following procedure describes how to install the firmware and configuration

files.

Step Action
1 If DHCP is disabled, manually enter the configuration server’s IP address. For details on manually
setting DHCP, see Chapter 4, the section “DHCP” on page4-4.
2 Copy the firmware file <phone model>.st to the root directory of the configuration server. The IP
phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP
phone.
Note: The <phone model> attribute is the IP phone model (i.e., 53i.st, 55i.st)
3 Copy the Aastra configuration files (aastra.cfg and <mac>.cfg) to the root directory of the
configuration server.
Note: The <mac> attribute represents the actual MAC address of your phone.
(i.e., 00085D030996.cfg).
4Note: Restart the IP phone as described in Chapter 3, “Restarting Your Phone” on page3-13.