Ethernet, Proxy ARP, Port Name | ADTRAN 550 specification

Chapter 9. Router

AUTHENTICATION

Write security: 2; Read security: 5

Enables the V2 Secret to be advertised when using RIP V2. AUTHENTICA- TION is visible only if RIP V2 is ENABLED (see the previous section, Pro- tocol on page 9-7).When enabled, requires all received RIP V2 packets to be authenticated against the configured V2 secret. All transmitted RIP V2 packets will include the secret.

This parameter is global throughout the ATLAS 550. Changes here affect all router interfaces.

	V2 SECRET
	Write security: 2; Read security: 5
	Defines the secret used to advertise routes
	when using RIP V2. To create the secret,
	enter the new secret, and press Enter on the
	keyboard. Then re-enter the secret and press Enter again to confirm it.
	V2 SECRET is only visible if AUTHENTICATION is set to ENABLED.
PROXY ARP	Write security: 2; Read security: 5
	Enables or disables proxy ARP on this interface.

ETHERNET	Write security: 2; Read security: 5
	Provides a way to configure various settings for the Ethernet port. The fol-
	lowing options are available for review and editing:
PORT NAME	Defines the name of the Ethernet port. You can leave this field blank.
IP ADDRESS	Lists the address assigned to the base Ethernet port. This address is com-
	posed of four decimal numbers, each in the range of 0 to 255, separated by
	periods. This value is set to 0.0.0.0 by default. The IP address is used for the
	Ethernet interface. Obtain the correct IP address from your LAN administra-
	tor.

DEFAULT GATEWAY Defines or changes the default gateway. Enter the default gateway address by entering a decimal number into the appropriate field and then pressing Enter to move to the next field. You will need a default gateway if the LAN contains multiple segments. This address is composed of four decimal num- bers, each in the range of 0 to 255, separated by periods. This value is set to

0.0.0.0by default. Contact your LAN administrator for the appropriate ad-

dress.

9-8

ATLAS 550 User Manual

61200305L1-1

Image 122

ADTRAN 550 user manual Ethernet, Proxy ARP, Port Name

Contents

Atlas Trademarks Service Type REN/SOC FIC Usoc Affidavit Requirements for Connection to Digital Services Page Canadian Equipment Limitations Reference Information About this Manual IntroductionGetting Started Working with the Atlas Keyboard Commands Notations and Conventions Menu Items Limited Product Warranty Additional Warranty InformationPage Table of Contents Chapter Using the Front Panel 61200305L1-1 Xiii Chapter Module Terminal Menus Modules Menu T1Network Interface Module Chapter Router Dedicated Maps 10-1 Dial Plan 11-1 61200305L1-1 Xix Table of Contents 12-1 Xmodem CRC Appendix B OSI Model and Frame Relay Technology Overview Table of Contents Xxiv List of Figures List of Figures 61200305L1-1 Xxvii List of Figures Xxviii List of Tables List of Tables Introduction Product Overview Access Router Frame Relay Access Switch Frame Relay Circuit Router Additional Applications Dedicated and Switched Connection Maps in a Single PlatformDigital Access Cross-Connect System Dacs WAN Overbooking Atlas 550 Features Dedicated Connection Maps Switched Connection MapsTesting Performance Monitoring Inspecting the Adtran Shipment InstallationContents of Adtran Shipments Grounding Instructions Reviewing the Rear Panel Design Supplying Power to the UnitMounting Options PIN Name Description Control/Chain In PortControl/Chain In Pinout Control/Chain Out Pinout Control/Chain Out PortEthernet Connection Ethernet Pinout Alarm Relay Connector Pinout Alarm Relay ConnectionExternal Alarm Relay Monitor Connection Pin Name Description Network RJ-48C Pinout External Relay Monitor Connector PinoutNetwork Connection Test Interface Frame Relay SpecificationsNetwork Interface 15-pin Male D-connector Pinout Option Slots IP Router SpecificationsInstalling Option Modules Installation Operation Using the Terminal MenusUsing VT-100 Terminal Emulation Overview Instructions for Defining the IP Address Step Action Using Telnet Starting a Telnet Session Operation Using the Front Panel ACO Switch Craft Port Pinout Craft PortFront Panel Leds Atlas 550 Front Panel Description Feature Description Controller Status LEDsACO Switch Network Module LEDs Ethernet For these LEDs This color light Indicates that PowerAtlas 550 LEDs Remote Module Online Module Test Using the Front Panel Viewing the Menus Navigating the Terminal MenusTerminal Menus Window Window Pane Navigation Menu PathWindow Panes Additional Terminal Menu Window Features Navigating Using the Keyboard Keys Extended Help To do this Press this key Moving through the MenusSession Management Keystrokes To do this Press this Configuration Keystrokes Getting Help System Control Terminal Menus To do this Go to this menu System Info Password Security LevelsSecurity Levels Rights System Location Startup Mode Current TIME/DATEInstalled Memory System Contact System Status Menu Event LOG Clear System Event LOG Ethernet Port S Tatus Resource Usage Ration Chain Port TX Chain Port Signal LeadsZero Bytes Primary Timing Source System ConfigBackup Timing Source MAX Telnet Sessions Chain Port Snmp AccessMbps Snmp Current ES Thrsh Total PCV Thrsh D4 Total PCV Thrsh ESF Syslog Setup Event Logging Deleting Passwords Access PasswordsInstructions for Adding/Deleting Passwords Licenses Alarm Relay Reset Alarm Relay Threshold System Utility Menu Available update options vary depending on whether you Indicates the slot number Tftp Server Update StatusConfig Transfer Configuration file, reboots, then restarts using the new View Self-test Log TDM RAM DSP RAMRTC RAM Dram Reboot System Factory Default System Module Terminal Menus Modules Type AlarmSLT Menu REV Modules Menu T1Network Interface ModuleStatus Yellow LOSRED DS0 a Larm Displays the A/B signaling bits for Rx and Tx DS0s DS0 a Larms TX Prms LBO LOC LB Module Terminal Menus Packet Manager Packet Manager Menus Packet Manager Menu Tree Packet Endpnts Frame Relay Statistics LMIPerformance Tbop Statistics Dlci Fecn Count ConfigBecn Count Operates in NNI mode QOS Dlci State PVCCIR Sublinks Example Dlci QOS Usage Characters Character Description Endpnts Sort Results MN/AV/MX DLYEndpnt Count Protocol Packet CnctsSublink Cncts Sort Enable IQ StatsPort Enables Frame Relay IQ View IQ Statistics INK Poll CRC Error TX Fecn PVC IA TimeRX Fecn RX Becn RX CR TX CR Packet Manager Router Router IP Menu Tree IP Menus Static Routes ARP Cache Routes Interfaces Subnet Mask FAR-END Address Only advertises routes not learned through this interface Port Name EthernetProxy ARP Ping TX Stats Reset StatsStatistics START/STOP InUnknownProtos ReasmTimeoutName Description ForwDatagrams InDiscards Icmp Icmp Statistics OutEchoReps Name Description OutRedirectsOutEchos OutTimestamps IP Fast Cache Statistics UDP StatisticsIP Fast Cache UDP Port UDP RelayRelay Table Router Dedicated Maps Dedicated Maps Menu Tree Current MAP Using Dedicated Maps with Frame RelayActivate MAP Auto Connects Create / Edit MapsMAP Name From S LT 1ST DS0 To S LT/SRT/PEP DSO Rate T1 Trouble Code Service only applies to non-RBS T1s Activate Time SIGRBS Enbl DAY T1-A T1-B Example 1 Setting Trunk ConditioningExample 2 Creating a Dedicated Map PBX Atlas External Router Configuring the Ports for Example Instructions for Configuring the Ports Instructions for Defining the Data Connections Data Connections Instructions for Defining Voice Connections DS0s Completed Dedicated Map for Example 10-12 61200305L1-1 Dial Plan Dial Plan Menu Dial Plan Menu Tree OUT#ACCEPT Network TermSLOT/SVC RC ID 5 = Data 56K Ifce ConfigData 64K 64K and Data 56K SRC ID User TermIN#ACCEPT Write security 3 Read security $ rejects all long distance calls, but only for this User Global Param Interface Configurations Automatic Routeback Rejection Global Tone Type Dual T1/PRI Module Network TERMINATION/PRI Strip MSD Network Specific Facility Voice Data Called Digits Transferred Prefix Outgoing Caller Dual T1/PRI Module Network TERMINATION/RBS Source ID FGD RX Sequence DS0S AvailableFGD TX Sequence Wink After ANI Digit Suppression Direct Inward Dialing Trunk Number Dual T1/PRI Module User TERMINATION/PRI Network Specific Facility Called Digts Transferred Outgoing Caller Source ID Signaling Method Dual T1/PRI Module User TERMINATION/RBS If Feature Group D is used, did refers only to Dnis digits Did D Igts Dual NX56/64 Module User Termination Source ID Number to Dial Ports AvailableNumber of Ports Call Type D64, D56 Quad BRI/U Module Network TerminationSpid Number Quad BRI/U Module User Termination Spid List Creating Dial PLANS-EXAMPLES Example 2 Point-to-Point Connection Dial Plan Configuration Understanding Dial Plan ConfigurationsExample 1 Pstn Connection Dial Plan Configuration PORT/PEP Connecting Packet Endpoints in Frame RelayPktendpt Port/PEP Menu Call Routing Table for Routing Using Incoming Number Pktvoice ORT/PEP 12. Interface Configuration Network Termination Did Prefix Menus for Network TerminationDid Digits Menus for User Termination Did D Igits Xmodem Firmware Updates Updating Firmware Updating Firmware using Xmodem Instructions for Updating Firmware Using Xmodem Instructions for Updating Firmware Using Xmodem Step Action Tftp Firmware UpdatesUpdating Firmware using Tftp Filename of the update file that was recorded earlier Step Action Using a Telnet program, log in to AtlasYPE when updating a LL M Odules of a T YPE in the Atlas Current firmware update or any errors encountered during Complete Upload Tftp Upload MessagesMessage Meaning Incomplete Upload 12-6 61200305L1-1 Snmp Basic Components Snmp ManagementSnmp Overview MIB Trap Destination List Configuring a Trap Destination List via the Terminal MenuSnmp Traps Standard Snmp Traps Disabling Trap Generating EventsStandard Traps Trap Name Severity Description DS1 Traps Current Alert Severity Description Current Alert Snmp TrapsDS1 Snmp Current Alert Traps Total Alert Snmp Traps Clearing DS1 Alert Traps Total Alert TrapsTotal Alert Severity Description Far End Alert Traps Adtran Utilities Syslog Host Daemon SysLog GUI Atlas 550 SysLog Host GUI Monitor Menu Bar File Help DisplayLOG Files Telnet Utility Telnet Menu Tree Session Connect Edit Options Capture IP Status ContentsVT-100 Utility About Edit Port Tftp Server Utility Colors Server EnableDisable Abort LOG Field Status FieldMeter Field Print LOG Unsuccessful Transfer Saving the Current Configuration to a Tftp ServerInstructions for Saving the Current Configuration Retrieving the Configuration from a Tftp Server Request Appendix a System Event Logging Table A-1. System Event Event Category Console Log String Table A-2. Switchboard Events Table A-3. Nx 56/64 Events Table A-4. T1 Events Table A-6. Isdn Events Table A-4. T1 Events Category Console Log StringTable A-5. Ethernet Events Isdn Cause Codes Table A-7. Isdn Cause Code Events Category Cause Code LOG Entries Table A-8. Cause Code Log Entry Location Designations Appendix A. System Event Logging Table B-1. Seven-Layer OSI Model Appendix B OSI Model and Frame Relay Technology OverviewOSI Model Example 1 OSI Model Related to Process of Mailing a Letter Send Process Receive Process Frame Relay Virtual Circuits Figure B-2. Frame Relay Network using Virtual Circuits Figure B-1. Three Virtual Circuits in One Physical Circuit Local Management Interface LMI Data Link Connection Identifier DlciUser-to-Network Interface Use Committed Information Rate CIRTable B-2. LMI Group of Four Dlci Assignments Annex a and Annex D Managing Network Congestion Figure B-4. Network Congestion and Flow Control Tbop Figure C-1. Atlas to Support Packet Data Configuration Appendix C Frame Relay Examples Figure C-3. Menu for Creating Packet Endpoints Example IP Routing Network-External Routers Figure C-9. Menu for Configuring Packet Endpoints 1 Sublinks Figure C-14. Menu for Creating Packet Endpoints Figure C-16. Menu for Connecting Packet Endpoints Step Figure C-18. Public Frame Relay Network Step Figure C-22. Menu for Configuring Dial Plan Step Example 5 Private Frame Relay Network-Packet Voice Figure C-25. Menu for Creating Packet Endpoints Figure C-29. Connecting PBX DS0 to Frame Relay Endpoint Figure C-30. Connecting FR Endpoint to FR Private Network Figure D-1. Atlas 550 Configured for the Router Option Appendix D Router Examples Example IP Routing NETWORK-ATLAS AS the CENTRAL-SITE Router Figure D-3. Creating Packet Endpoint Figure D-4. Creating Sublinks Appendix D. Router Examples Appendix E Troubleshooting Power-up Self Test Fails Cannot pass data from T1 interface to V.35 port Frame relay link is down Appendix E. Troubleshooting Appendix F Acronyms and Abbreviations PBX Glossary Law Becn Dhcp Fecn Hdlc LEC NNI PCM SNA UDP Appendix G. Glossary Appendix G. Glossary Numerics SymbolsIndex Index-2 61200305L1-1 Index-3 Index-4 61200305L1-1 Index-5 Index-6 61200305L1-1 Index-7 Index Index-8 Repair and Return Pre-Sales Inquiries and Applications SupportPost-Sale Support