ADTRAN 550 user manual Data 64K, 64K and Data 56K, Out#Rej, Ifce Config

	Chapter 11. Dial Plan
	SECONDARY SEARCH
	The same accept rules apply for all secondary number searches as for prima-
	ry searches.
DATA 64K,	Reflects the bearer capability the Network has provisioned for this line. If
DATA 56K,	the ISDN lines were purchased with different services provisioned, then
AUDIO, SPEECH	ATLAS 550 would send the call out of the port which supports the type of
	service the call requires.
	For example, the Network termination is on a pair of BRIs (with the same
	phone number) with one provisioned for data and the other for voice. By en-
	abling data in one and not the other, ATLAS 550 ensures that calls bearing
	data will be sent out the right BRI interface.
TREAT CALL AS	Allows the incoming call to be treated as the selected call type, regardless of
	the actual incoming call type. The default selection, AS RECEIVED, effectively
	disables the feature by using the actual call type. Other options include DATA
	64K and DATA 56K.
OUT#REJ	Write security: 3; Read security: 5
	Defines the parameters for the outgoing calls that ATLAS 550 will not send
	to the Network.
REJECT NUMBER	Identifies which numbers this endpoint will not pass on toward the Net-
	work (PSTN). The reject list may consist of multiple entries. The reject list
	may be used to more easily specify the call filtering desired. The wild cards
	are identical as in OUT#ACCEPT (see Out#Accept on page 11-3).
	The Reject list takes precedence over the Accept list. For example,
	1-900-$ rejects all 1-900 long distance calls, and 1-$ rejects all long
	distance calls.
DATA 64K,
	Rejects outgoing calls based on call type. For example, setting the reject
DATA 56K,	number to $, Digital 56/64 to enabled, and Audio and Speech to disabled,
AUDIO, SPEECH	rejects all digital calls while not rejecting analog calls.
	This list may remain blank if the Accept list meets desired filtering.
IFCE CONFIG
	Sets configuration parameters for the endpoint. These parameters vary by
	the type of port selected. For detailed information on the interface configu-
	ration, refer to Interface Configurations on page 11-10.

61200305L1-1 ATLAS 550 User Manual 11-5