ADTRAN 550 user manual Sig, Rbs, Activate Time, Enbl DAY

Chapter 10. Dedicated Maps

Table 10-1 describes the options for T1 TRUNK CONDITIONING SERVICE.

		Table 10-1. T1 Trunk Conditioning Service Options
Option		Description
T1 Trunk Conditioning State		Defines the final fault signaling state as follows:
		IDLE is used for one-way trunks; that is, for outgoing or incoming
		calls, but not both.
		SEIZED is used for two-way trunks. It prevents the PBX from
		attempting to use a failed trunk for an outgoing call.
		This option is not included for CUSTOM.
T1 Fault Signaling (AB/AB)		Defines to the ATLAS 550 the signaling bits being used on the trunk.
		Fault signaling is only visible when RBS is turned on.
T1 Trouble Code Value		Defines to the ATLAS 550 the value to set in the data field for
		outgoing DS0s when a trouble condition exists.
TO CONFIG	Write security: 3; Read security: 5
	Specifies the configuration for the TO connection. The selections that dis-
	play in this field are based on the type of module selected in the TO SLOT
	option. See From Config on page 10-4 for a description of these settings.
SIG	Write security: 3; Read security: 5
	(Signaling) Defines whether the connection has active RBS. Where RBS is
	not an option, the ATLAS 550 automatically assigns the correct setting. For
	example, a T1-to-Nx connection is set to Off.
	RBS	Preserves the signaling bits between the connections.
	OFF	Ignores signaling bits.
ACTIVATE TIME	Write security: 3; Read security: 5
	Sets the time when the map becomes active if you have selected AUTO in the
	ACTIVATE MAP field (see Activate Map on page 10-2). Enter this time in
	hh:mm:ss 24-hour format.
ENBL DAY	Write security: 3; Read security: 5
	Specifies which days of the week the map is active.

10-6 ATLAS 550 User Manual 61200305L1-1