ADTRAN 550 user manual Session, Connect

Chapter 14. ADTRAN Utilities

SESSION	Click on SESSION to open the Telnet session.
CONNECT	Opens dialog box for
	setting HOST NAME and
	PORT parameters for a
	Telnet session. Also lets
	you EDIT ENTRY, ADD
	NEW entry, and DELETE
	stored entries. When the parameters are set, click CONNECT to make the con-
	nection. Click CANCEL to end the session.
HOST NAME	Accepts and stores host names. You may either enter a name, an IP address,
	or a domain name directly from this field. Click on the drop-down arrow to
	display a complete list of previously stored host names.
PORT	Provides several port options. You may enter port numbers directly into this
	field to connect to non-standard ports or select the drop-down combo-box to
	display the following options:
	TELNET	Establishes a Telnet session
	ECHO	Provides a loopback for troubleshooting
	DISCARD	Bit bucket; discards data
	DAYTIME	Returns the time
	CHARGEN Displays as a unique character stream; used for self-tests
EDIT ENTRY	Changes either the unit name or
	the IP address of each host. Press
	either Tab, Return, or a period (.)
	after each number in the IP ad-
	dress to move to the next field. If
	you press Return or (.) while the
	cursor is located in each IP field,
	that field entry is deleted.
ADD NEW	Prompts you for the same information as the EDIT ENTRY dialog box for new
	host. When enabled, the USE DNS (Domain Name Server) feature allows us-
	ers to request DOMAIN LOOK UP via a DNS server on the network, rather than
	specifying an IP address. The name then appears in the HOST NAME field.
DELETE	Removes a host name from the list; simply select the host name you want to
	remove, and, at the prompt, click DELETE.
CONNECT	Establishes the Telnet session.

14-6 ATLAS 550 User Manual 61200305L1-1