ADTRAN 550 user manual Using Dedicated Maps with Frame Relay, Activate MAP, Current MAP, Auto

Chapter 10. Dedicated Maps

USING DEDICATED MAPS WITH FRAME RELAY

After packet endpoints are created, they must be connected to a physical port. You can connect the endpoints using either the DEDICATED MAP or the DIAL PLAN (see also, Chapter 11, Dial Plan). DEDICATED MAPS “nail” the endpoints to a service, and the DIAL PLAN associates a phone number with the endpoint.

For packet links created within the PACKET MANAGER MENU, use DEDICATED MAPS (see Figure 10-2) to connect packet endpoints to a physical port. Nail the endpoint to a service by selecting DEDICATED MAPS and picking a phys- ical slot (FROM SLT) and a port (PORT/PEP) for the data. Assign the DS0s (FROM CONFIG), and then set the service (TO SLT/S) to PKT ENDPT or PKT

VOICE.

Figure 10-2. Dedicated Maps - Frame Relay

ACTIVATE MAP	Write security:3; Read security:5
	Activates a dedicated map—automatically or manually. You can have up to
	five different dedicated maps, each with an optionally specified name.
AUTO	Automatically activates a particular dedicated map at the time and day
	specified in ACTIVATE TIME (see Activate Time on page 10-6).
MAPS 1 THROUGH 5 Allows you to manually activate a specific dedicated map.
		Instructions for Manually Activating a Dedicated Map
	Step		Action
	1		Move the arrow keys to highlight the ACTIVATE MAP field and
			press ENTER.
	2		Move the arrow key to highlight the map of choice from the pop-
			up menu list and press ENTER.

CURRENT MAP	Read security: 5
	Displays the name of the currently active dedicated map (read-only).

10-2 ATLAS 550 User Manual 61200305L1-1