Chapter 11. Dial Plan
QUAD BRI/U MODULE: NETWORK TERMINATION
| The Quad BRI/U Module can interface directly with the network (PSTN). |
| When you are working in the NETWORK TERM section of the DIAL PLAN menu, |
| and SLT is defined as |
| are available: |
SWITCH TYPE | Write security: 3; Read security: 5 |
| Defines the type of ISDN switch to which the port is connected. If con- |
| nected to another ATLAS, both need to be set to the same switch type. |
| Choices include LUCENT 5E, NORTHERN DMS 100, and |
SPID LIST | Write security: 3; Read security: 5 |
| To properly operate with a network (PSTN) ISDN switch, the BRI interface |
| must have Service Profile Identifiers (SPIDs) and phone number(s) that |
| match the SPID(s) and phone number(s) programmed into the ISDN switch |
| for this line. Each BRI may have one or more phone numbers and SPIDs. |
| The SPID LIST submenu defines these parameters to ATLAS. |
PHONE NUMBER | The phone number(s) assigned to this BRI phone line. |
SPID NUMBER | This entry must match the SPID number(s) which has been set in the net- |
| work’s ISDN switch (or in the PBX) for this BRI line. A SPID must be entered |
| for each phone number. |
CALLS | The number of calls (1 or 2) which can be received or sent on this number/ |
| SPID. |
D64, D56, | These options reflect the network provisions for this SPID. If the BRI was |
AUDIO, SPEECH | purchased with different services provisioned for the SPIDs, then the call |
| must match the services supported. |
STRIP MSD | Write security: 3; Read security: 5 |
| Strips a selected quantity (choose from NONE, 1, 2, and 3) of the Most Signif- |
| icant Digits (MSD) of a dialed number prior to being forwarded out of the |
| port. |
| Example: |
| A network port could be set to accept all calls beginning with 9 (9$), and |
| then with STRIP MSD set to 1, all digits would be sent toward the network |
| except the leading 9. |
|
|
| STRIP MSD does not affect CALL ACCEPT criteria. All of the digits |
| (including the MSDs that are subsequently stripped) are used as |
| accept criterion. |
|
|
ATLAS 550 User Manual |