ADTRAN 550 user manual Licenses

Chapter 6. System Control Terminal Menus

	If you lose or forget the ATLAS 550 system administrator password,
	contact ADTRAN technical support (see last page of this manual)
	for help in resetting the password.
LABEL
	Write security: 0; Read security: 5
	Defines a user name.
PASSWORD	Write security: 0; Read security: 5
	Allows you to change the password (the default password is password).
	The current password displays as a series of asterisks (********). The pass-
	word can contain up to 12 alphanumeric characters. You can also use spaces
	and special characters in the password. Remember, passwords are case-sen-
	sitive.
	Instructions for Changing Passwords
	1. Select the PASSWORD field—a new PASSWORD field displays.
	2. Type the new password in the ENTER field.
	3. Type the new password again in the CONFIRM field.
ACCESS RIGHTS	Write security: 0; Read security: 5
	Defines the password level for the corresponding label. You can select from
	six different password levels (see also Table 6-1 on page 6-2).
ACTIVE	Write security: 0; Read security: 5
	Displays the number of users for each label that are currently logged into
	the system.
LICENSES	Write security: 0; Read security: 0
	Provides menus to enable the optional ATLAS 550 feature upgrades.
FEATURE	Names the ATLAS 550 feature upgrade.
LICENSE KEY	Displays the license key of the feature upgrade.
SERIAL NUMBER	Displays the serial number of the feature upgrade.
LIC CNT	Displays the number of instances of the feature that the license provides.
	This field may not be applicable for a given feature—if it is not, this field is
	blank.

6-16 ATLAS 550 User Manual 61200305L1-1