ADTRAN 550 user manual Packet Endpnts, Status

Chapter 8. Packet Manager

PACKET ENDPNTS	The PACKET ENDPNTS menu defines, monitors, and tests a packet endpoint.
	Submenus include STATUS, PERFORMANCE, CONFIG, TEST, ENDPNT COUNT,
	and ENDPNTS SORT.
STATUS	STATUS submenus display the status of each packet endpoint including the
	packet endpoint name (ENDPNT NAME), the protocol type (PROT), the signal-
	ing role (SIG ROLE), the signaling type (SIG TYPE), the signaling state (SIG
	STATE), and the connections (CURRENT PORT). The following sections dis-
	cuss each of these fields.
ENDPNT NAME	Read Security: 5
	Displays the packet endpoint name as defined in the PACKET ENDPNTS/
	CONFIG MENU (also see Config on page 8-6).
PROT	Read Security: 5
	Displays the layer 2 protocol that this packet endpoint terminates. FR indi-
	cates that this packet endpoint is configured for frame relay. TBOP indi-
	cates that this packet endpoint is configured for Transparent Bit Oriented
	Protocol (TBOP).
SIG ROLE	Read Security: 5
	Displays the frame relay signaling role for this packet endpoint. The
	selections include OFF, UNKNOWN, NETWORK, USER, and BOTH.
	OFF
	Indicates that the endpoint is configured so that it does not use signaling.
	UNKNOWN
	Indicates that the endpoint is configured to auto-detect the role, but has not
	yet done so.
	NETWORK
	Indicates that the endpoint is acting as the network end of a UNI link.
	USER
	Indicates that the endpoint is acting as one end of a UNI link.
	BOTH
	Indicates that the endpoint is acting as one end of an NNI link.
SIG TYPE	Read Security: 5
	Displays the frame relay signaling type used on this packet endpoint. Selec-
	tions include UNKNOWN, ANNEX A, ANNEX D, and LMI.
	UNKNOWN
	Indicates that the endpoint is configured to auto-detect the signaling stan-
	dard to use, but has not yet done so.

61200305L1-1 ATLAS 550 User Manual 8-3