Appendix C. Frame Relay Examples

Step 4

Configure the dial plan for packet voice. Refer to Chapter 11, Dial Plan for

 

details on configuration (see Figure C-22).

 

 

 

 

 

 

Figure C-22. Menu for Configuring Dial Plan

Step 5

Connect the packet endpoint to the physical interface (see Figure C-23).

 

 

 

 

 

 

Figure C-23. Menu for Connecting Packet Endpoints

Example 5: Private Frame Relay Network—Packet Voice

Example 5 (see Figure C-24) shows a private frame relay network using compressed voice. An ATLAS 550 is located at two sites (Atlanta and Boston) and a PBX is connected to each ATLAS 550 using a clear-channel T1 connection. Each PBX uses DS0s 1—23 for voice and DS0 24 for signaling; all calls are to be completely managed by the PBXs. In this network, the ATLAS 550 does not terminate the signaling information, but forwards the signaling between endpoints using a transparent bit oriented protocol (TBOP) frame relay connection (requires the Voice Compression Module). To re-create this example, follow the process discussed below.

Packet voice transmission requires the VOICE COMPRESSION

MODULE.

Atlanta

ATLAS 550

ATLAS 550

Private

Frame Relay

Network

Boston

ATLAS 550

ATLAS 550

Router

Router

PBX

PBX

Figure C-24. Private Frame Relay Network Using Compressed Voice

C-8

ATLAS 550 User Manual

61200305L1-1

Page 228
Image 228
ADTRAN 550 user manual Example 5 Private Frame Relay Network-Packet Voice, Figure C-22. Menu for Configuring Dial Plan Step