
Chapter 8. Packet Manager
| ANNEX A |
| The endpoint is signaling using |
| ANNEX D |
| The endpoint is signaling using ANSI |
| LMI |
| The endpoint is signaling using Group of Four LMI specification. |
SIG STATE | Read Security: 5 |
| Indicates the current condition (i.e., active frame relay signaling) of this |
| packet endpoint, as defined by the frame relay configuration settings. This |
| field is either ACTIVE or INACTIVE. |
CURRENT PORT | Read Security: 5 |
| Displays the connections for the packet endpoint. The letter U in this field |
| indicates that this packet endpoint is used in the PACKET CNCTS map (also |
| see Packet Cncts on page |
| physical port to which this packet endpoint is connected, as defined in the |
| DEDICATED MAP (also see Dedicated Maps on page |
| nelized interface such as a T1, the DS0 assignment is also provided. |
PERFORMANCE | Displays performance information for each packet endpoint including END- |
| PNT NAME (endpoint name), PROTOCOL, LINK STATS, and SUBLINK STATS. |
ENDPNT NAME | Read Security: 5 |
| Displays the packet endpoint name as defined in PACKET ENDPNTS/CONFIG |
| (also see Config on page |
PROTOCOL | Read Security: 5 |
| Displays the layer 2 protocol that this packet endpoint terminates as |
| defined in PACKET ENDPNTS/CONFIG (also see Config on page |
LINK STATS | Read Security: 5 |
| Displays layer 2 performance statistics. This field is dependent on the type |
| of protocol (Frame Relay or TBOP) selected in PACKET ENDPNTS/CONFIG |
| (also see Config on page |
| Frame Relay Statistics |
| These fields reflect the total count since last cleared: |
| TX PACKETS |
| Total number of frame relay packets transmitted through this packet end- |
| point, including both user data (on all PVCs) and signaling. |
| RX PACKETS |
| Total number of frame relay packets received through this packet endpoint |
| (on all PVCs). |
ATLAS 550 User Manual |