
Chapter 13. SNMP Management
|
| Table |
|
|
|
Total Alert | Severity | Description |
|
|
|
|
|
|
adATLAS550TotalES | Warning | The total interval errored second threshold has been exceeded. |
|
|
|
adATLAS550TotalSES | Warning | The total interval severely errored second threshold has been |
|
| exceeded. |
|
|
|
adATLAS550TotalSEFS | Warning | The total interval severely errored framing second threshold |
|
| has been exceeded. |
|
|
|
adATLAS550TotalUAS | Major | The total interval unavailable second threshold has been |
|
| exceeded. |
|
|
|
adATLAS550TotalCSS | Warning | The total interval controlled slip second threshold has been |
|
| exceeded. |
|
|
|
adATLAS550TotalPCV | Warning | The total interval path code violations have been exceeded. |
|
|
|
adATLAS550TotalLES | Warning | The total interval line errored second threshold has been |
|
| exceeded. |
|
|
|
adATLAS550TotalLCV | Warning | The total interval line code violation threshold has been |
|
| exceeded. |
|
|
|
Clearing DS1 Alert Traps
The ATLAS 550 clears the event bits after sending the alert trap or a response to a Get request for the adDS1CurrentAlert variable. The ATLAS 550 clears the current alert values at the beginning of a new
Far End Alert Traps
Current alert and total alert traps are near end events; however, the ATLAS 550 also supports current alert and total alert traps for the far end. Far end alert traps are generated upon event bit changes in adDS1FarCurrentAlert (for current alerts) and in adDS1FarTotalAlert (for total alerts).
Clearing Far End Alert Traps
Current and total far end alert traps can be disabled by setting the corre- sponding enable bit equal to zero in the adDS1FarCurrentArm and the adDS1FarTotalArm variables, respectively.
Far end alert traps can also be disabled by setting adDS1AlertEnable = Off.
ATLAS 550 User Manual |